CADP (CONSTRUCTION AND ANALYSIS OF DISTRIBUTED PROCESSES) MANUAL INSTALLATION PROCEDURE ****************************************************************************** If you are planning to use CADP on a computer running Linux, you should read first the instructions for setting up your computer in order to run CADP. These instructions are given in file $CADP/INSTALLATION_LINUX. They are also available on the Web from: https://cadp.inria.fr/linux.html If you are planning to use CADP on a computer running Windows, you should read first the instructions for setting up your computer in order to run CADP. These instructions are given in file $CADP/INSTALLATION_WINDOWS. They are also available on the Web from: https://cadp.inria.fr/windows.html If you are planning to use CADP on an Apple computer running macOS, you should read first the instructions for setting up your computer in order to run CADP. These instructions are given in file $CADP/INSTALLATION_MACOS. They are also available on the Web from: https://cadp.inria.fr/macOS.html ****************************************************************************** The present document describes an alternative to the automatic installation procedure based on Installator, the CADP Installation Assistant, and defined in file $CADP/INSTALLATION_1. Normally, if the automatic installation procedure succeeds, you can safely avoid reading the present document. However, if the automatic installation procedure fails or is not applicable (for instance, because you do not have a Web browser installed on your machine, or because your system administrator has set up a firewall that prevents you from performing standard "ftp" downloads), then the manual installation procedure described in the present document can be useful to you. ****************************************************************************** This document is intended to persons in charge of installing or upgrading the CADP software. Please note that the whole CADP software is entirely contained in a single directory. There is no constraint on the location of this directory: you can install it any place on any filesystem (provided that there is sufficient disk space). On Windows/WSL, it is suggested to install CADP among the Windows files (e.g., on your desktop) rather than in a given Linux machine running in WSL. This way, a single CADP installation can be shared by several Linux machines. On Windows/Cygwin, it is highly recommended to install CADP in C:\cadp, assuming that Windows and Cygwin are also installed on drive C. All the CADP tools should be executed in working directories located on this drive. On a local area network, it is advised to have only a single installed copy of the CADP software, which is exported and made visible to other machines by means of mounted filesystems (e.g., using NFS). This functioning mode is permitted by the software licensing scheme used by the CADP software. On Unix-based systems (namely, SunOS, Linux, and macOS), it is not necessary to be a super-user ("root") to install or upgrade the CADP software. We even recommend that you install it as an ordinary user (not "root"). However, you may need super-user privilege to install additional software (e.g., Gnuplot) suitable for using all functionalities of CADP. On Windows/Cygwin, you will need administrator privileges to install both the Cygwin software and the CADP software. In particular, you must install CADP from a Cygwin Terminal window launched with administrative privileges (right-click on the Cygwin icon and select "Run as Administrator"). In any case, if a copy of CADP already exists on your system, you will need to be the owner of the directory containing CADP (including all its files and sub-directories) to perform the upgrade. To perform a manual installation of CADP, it is mandatory that the shell variable CADP refers to the directory chosen for installation, or to the directory containing the existing version of CADP (which will be replaced by the new one). On Unix-based systems, this can be done by a Bourne shell command: CADP=/opt/cadp ; export CADP or by a C-shell command: setenv CADP /opt/cadp On Windows/Cygwin systems, this can be done by the following command: CADP="c:/cadp" ; export CADP The following remarks apply to CADP on Windows/Cygwin: - As mentioned above, it is highly recommended to install CADP in C:\cadp and to set $CADP to "c:/cadp". Once the installation is finished, variable $CADP will be given another value ("/cadp") as mentioned in the $CADP/INSTALLATION_2 file. - The CADP software uses symbolic links, but is usually installed on a file system that does not support symbolic links natively (which is the case of Microsoft's FAT and NTFS file systems). This issue is dealt with when the installation of CADP is done by applying the present instructions carefully. Notice that it is not possible to install a non-Windows version of CADP (e.g., a Linux version) on a Windows file system (e.g., FAT or NTFS) that does not support symbolic links. Also, your $PATH variable should be properly configured so as to give you access to certain system commands (such as "mkdir", "mv", "chown", etc.). Before installing CADP, please verify the following points (see file $CADP/INSTALLATION_2 for a description of supported architectures / operating systems): - If your machine/architecture is "iX86", "x64", or "mac64": Your $PATH variable should include directory "/bin" and "/usr/bin" - If your machine/architecture is "sol64" or "win64": Your $PATH variable should include directory "/bin" ------------------------------------------------------------------------------- 1) First, you have to download the most recent version of CADP using FTP (File Transfer Protocol). Make sure that you are in possession of the password required for downloading the latest version of the CADP. This password should have been sent to you by the CADP development team. If you do not have this password, please enquire by sending an e-mail to "cadp@inria.fr". The password is the same for the automatic installation procedure (using Installator) and the manual installation procedure. In the sequel, we will denote this password as the generic character string "XXXXXXXXXX". The FTP distribution of the CADP software consists of several (tar-compressed) files. a) There is a "base" file, which contains all non-binary files (e.g., text files and executable shell-scripts) of the CADP distribution. By convention, the name of this file has the form: CADP_base_XXXXXXXXXX.tar.gz b) Additionally, for each version of machine architecture / operating system that is currently supported, there is also a specific file, which contains all binary programs for this version. By convention, the names of these files have the form: CADP_iX86_XXXXXXXXXX.tar.gz CADP_x64_XXXXXXXXXX.tar.gz CADP_mac64_XXXXXXXXXX.tar.gz CADP_sol64_XXXXXXXXXX.tar.gz CADP_win64_XXXXXXXXXX.tar.gz etc. To install the CADP software, you must download the "base" file and the architecture specific files (e.g., "iX86", "x64", "mac64", etc.) corresponding to the machines on which you plan to use CADP. In all cases, the generic string "XXXXXXXXXX" should be replaced with the actual password. For instance, if the password is equal to "97a_5b93ae32", then the actual names of the FTP files will be: CADP_base_97a_5b93ae32.tar.gz CADP_iX86_97a_5b93ae32.tar.gz etc. ------------------------------------------------------------------------------- 2) Set the environment variable CADP as explained above. If you have already an installed version of CADP, save it: mv "$CADP" "$CADP".old ------------------------------------------------------------------------------- 3) Then, create the installation directory: mkdir "$CADP" cd "$CADP" ------------------------------------------------------------------------------- 4) Then, download the various files of the CADP package. This can be done using either the 'wget' command (see Section 4a below), or the FTP client built in your Web browser (see Section 4b) or the standard FTP client provided by the operating system (see Section 4c below). ------------------------------------------------------------------------------- 4a) How to download using the 'wget' command: Type the following commands: wget ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_base_XXXXXXXXXX.tar.gz wget ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_iX86_XXXXXXXXXX.tar.gz wget ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_x64_XXXXXXXXXX.tar.gz wget ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_mac64_XXXXXXXXXX.tar.gz wget ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_sol64_XXXXXXXXXX.tar.gz wget ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_win64_XXXXXXXXXX.tar.gz ------------------------------------------------------------------------------- 4b) How to download using the FTP client built in the Web browser: Notice that many recent browsers no longer support FTP downloads. If your Web browser supports them, use it to download the following URLs: ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_base_XXXXXXXXXX.tar.gz ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_iX86_XXXXXXXXXX.tar.gz ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_x64_XXXXXXXXXX.tar.gz ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_mac64_XXXXXXXXXX.tar.gz ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_sol64_XXXXXXXXXX.tar.gz ftp://ftp.inrialpes.fr/pub/vasy/cadp/CADP_win64_XXXXXXXXXX.tar.gz ------------------------------------------------------------------------------- 4c) How to download using the standard FTP client: On many systems, this client is named 'ftp', but on macOS and Windows/Cygwin it is named 'ncftp'. Start a FTP session to get the latest version of the tools. You have to type in the commands below (only those written after the shell-prompt '$' or the ftp prompts 'ftp>' and 'Password:'). $ ftp -n ftp.inrialpes.fr Connected to ftp-serv.inrialpes.fr. 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- 220-... ftp> binary 200 TYPE is now 8-bit binary ftp> user anonymous 230 Anonymous user logged in ftp> cd pub/vasy/cadp 250 OK. Current directory is /pub/vasy/cadp Note: The contents of 'pub/vasy/cadp' directory cannot be queried (for instance, the 'ls' command gives no information). However, downloading files works, provided that the names of the files are known. ftp> get CADP_base_XXXXXXXXXX.tar.gz 200 PORT command successful 150-Connecting to port ... 150 ... kbytes to download 226-File successfully transferred local: CADP_base_XXXXXXXXXX.tar.gz remote: CADP_base_XXXXXXXXXX.tar.gz ... bytes received in ... seconds (... Kbytes/s) ftp> get CADP_iX86_XXXXXXXXXX.tar.gz 200 PORT command successful 150-Connecting to port ... 150 ... kbytes to download 226-File successfully transferred local: CADP_iX86_XXXXXXXXXX.tar.gz remote: CADP_iX86_XXXXXXXXXX.tar.gz ... bytes received in ... seconds (... Kbytes/s) ftp> get CADP_x64_XXXXXXXXXX.tar.gz 200 PORT command successful 150-Connecting to port ... 150 ... kbytes to download 226-File successfully transferred local: CADP_x64_XXXXXXXXXX.tar.gz remote: CADP_x64_XXXXXXXXXX.tar.gz ... bytes received in ... seconds (... Kbytes/s) ftp> get CADP_mac64_XXXXXXXXXX.tar.gz 200 PORT command successful 150-Connecting to port ... 150 ... kbytes to download 226-File successfully transferred local: CADP_mac64_XXXXXXXXXX.tar.gz remote: CADP_mac64_XXXXXXXXXX.tar.gz ... bytes received in ... seconds (... Kbytes/s) ftp> get CADP_sol64_XXXXXXXXXX.tar.gz 200 PORT command successful 150-Connecting to port ... 150 ... kbytes to download 226-File successfully transferred local: CADP_sol64_XXXXXXXXXX.tar.gz remote: CADP_sol64_XXXXXXXXXX.tar.gz ... bytes received in ... seconds (... Kbytes/s) ftp> get CADP_win64_XXXXXXXXXX.tar.gz 200 PORT command successful 150-Connecting to port ... 150 ... kbytes to download 226-File successfully transferred local: CADP_win64_XXXXXXXXXX.tar.gz remote: CADP_win64_XXXXXXXXXX.tar.gz ... bytes received in ... seconds (... Kbytes/s) ftp> quit 221 Goodbye. ------------------------------------------------------------------------------- 5) Then, uncompress and extract the contents of the downloaded files. tar -xvpf CADP_base_XXXXXXXXXX.tar.gz rm -f CADP_base_XXXXXXXXXX.tar.gz tar -xvpf CADP_iX86_XXXXXXXXXX.tar.gz rm -f CADP_iX86_XXXXXXXXXX.tar.gz tar -xvpf CADP_x64_XXXXXXXXXX.tar.gz rm -f CADP_x64_XXXXXXXXXX.tar.gz tar -xvpf CADP_mac64_XXXXXXXXXX.tar.gz rm -f CADP_mac64_XXXXXXXXXX.tar.gz tar -xvpf CADP_sol64_XXXXXXXXXX.tar.gz rm -f CADP_sol64_XXXXXXXXXX.tar.gz tar -xvpf CADP_win64_XXXXXXXXXX.tar.gz rm -f CADP_win64_XXXXXXXXXX.tar.gz ------------------------------------------------------------------------------- 6) Set the owner, group and permission of the directory: chmod -R og-w "$CADP" chmod -R a+rX "$CADP" Note: this is an extra precaution, since the permissions of the files are already supposed to be correct. If you are installing CADP on Windows/Cygwin, run the following command: sh "$CADP"/src/com/cadp_adjust -verbose which takes care of symbolic links and CR/LF conversions in text files. ------------------------------------------------------------------------------- 7) You now have to prepare the license file for your copy of CADP. Before going on, please read the file $CADP/INSTALLATION_3, which describes the principles of the CADP software licensing scheme and explains how it has to be used. In the sequel, we assume that you have applied steps a) to d) described in file $CADP/INSTALLATION_3. e) Then, execute the following command: "$CADP"/com/rfl jupiter mars neptune venus > /tmp/CADP_LICENSE This command will prepare a prototype license file, containing all information required by the protection mechanism, and mail it to "cadp@inria.fr". Note: If you already have an old license file (e.g., "$CADP".old/LICENSE) you can reuse the list of machines listed in this file by typing the following command: "$CADP"/com/rfl -f "$CADP".old/LICENSE > /tmp/CADP_LICENSE This avoids the burden of listing the machines one by one. You can even add new machines (e.g., "jupiter") to those already listed in the old license file: "$CADP"/com/rfl -f "$CADP".old/LICENSE jupiter > /tmp/CADP_LICENSE f) Then, edit the resulting file /tmp/CADP_LICENSE and fill-in properly the fields named "Institution", "Official", and "E-mail". For each of these fields, you must replace the empty lines "XXXXXXXXXXXXXXXXXX..." with appropriate information. g) Then, e-mail this file /tmp/CADP_LICENSE as an attachment to cadp@inria.fr. When doing this, please, follow the indications available from https://cadp.inria.fr/installator/rfl.html h) In reply, you will receive a valid license file by e-mail. Install this file in $CADP/LICENSE according to the explanations given in the e-mail message. Beware not to alter the information contained in the license file, which may prevent the tools from working properly. i) If you do not receive a valid license file from us within two days, then it is likely that the message has not been sent properly or that it was blocked by spam filters. You should retry step g) above and, if you still get no answer, try to contact us by other means. ------------------------------------------------------------------------------- 8) Once the new installation is complete, you can remove the old version (unless you find more secure to keep it for a few weeks): rm -rf "$CADP".old ------------------------------------------------------------------------------- 9) Please, remember that all CADP users should customize their startup files as explained in the $CADP/INSTALLATION_2 file. ------------------------------------------------------------------------------- Written by Hubert Garavel. Last updated on 2024/09/12 16:03:51 -------------------------------------------------------------------------------